• +6012-548 7848
  • sales@pgtc.com.my

KSC-F

KSC-F

Share:


KSC-F

Description

The SCHUNK KONTEC KSC-F single-acting vises are perfectly suitable for equipping palletizing systems. Due to the modular system, the VERO-S interface and the 160° quick clamping, they can be adapted to new clamping tasks in no time at all.

Advantages – Your benefits

Extremely flat design
For maximum utilization of the machine room
Quick-clamping via torque wrench
Simple, quick and reliable workpiece clamping
High clamping forces
Ensure process reliability during machining
Large clamping range
High degree of flexibility
Lateral drainage slots
For drainage of coolant and chips
Wide range of applications
Suitable for rough and finished parts machining
Wide jaw program
Optimum adjustment to new clamping tasks
Optimum jaw support for O.D. and I.D. clamping due to a very long base jaw guidance
Allows high clamping forces at a long service life
Clamping by tension
No bending of the base body
VERO-S interface
Versatile range of combinations due to the VERO-S modular system. Even shorter set-up times

Options and special information

The highly efficient all-rounder for raw and finished part machining
The SCHUNK KONTEC KSC-F single-acting clamping vise with fixed jaw is excellently suitable for automated machine loading. They score with a quick-adjustment of the clamping range, flat design, and a low weight. These are the perfect conditions for the use in pallet storage units. The sizes KSC-F 80, KSC-F 125, and KSC-F 160 are particularly designed for the common pallet sizes 320x320 mm, 400x400 mm, and 500x500 mm.
It achieves high clamping forces even at a comparably low torque. As the clamping is provided by tension, the bending load on the base body is minimized. The vises are therefore perfectly suitable for the use on the quick-change pallet system from SCHUNK.

Description

The SCHUNK KONTEC KSC-F single-acting vises are perfectly suitable for equipping palletizing systems. Due to the modular system, the VERO-S interface and the 160° quick clamping, they can be adapted to new clamping tasks in no time at all.

Advantages – Your benefits

Extremely flat design
For maximum utilization of the machine room
Quick-clamping via torque wrench
Simple, quick and reliable workpiece clamping
High clamping forces
Ensure process reliability during machining
Large clamping range
High degree of flexibility
Lateral drainage slots
For drainage of coolant and chips
Wide range of applications
Suitable for rough and finished parts machining
Wide jaw program
Optimum adjustment to new clamping tasks
Optimum jaw support for O.D. and I.D. clamping due to a very long base jaw guidance
Allows high clamping forces at a long service life
Clamping by tension
No bending of the base body
VERO-S interface
Versatile range of combinations due to the VERO-S modular system. Even shorter set-up times

Options and special information

The highly efficient all-rounder for raw and finished part machining
The SCHUNK KONTEC KSC-F single-acting clamping vise with fixed jaw is excellently suitable for automated machine loading. They score with a quick-adjustment of the clamping range, flat design, and a low weight. These are the perfect conditions for the use in pallet storage units. The sizes KSC-F 80, KSC-F 125, and KSC-F 160 are particularly designed for the common pallet sizes 320x320 mm, 400x400 mm, and 500x500 mm.
It achieves high clamping forces even at a comparably low torque. As the clamping is provided by tension, the bending load on the base body is minimized. The vises are therefore perfectly suitable for the use on the quick-change pallet system from SCHUNK.

Download PDF Below



 Inquiry - KSC-F