ROTA-M flex 2+2
Description
Centrically compensating 4-jaw chuck with large compensation stroke.Advantages – Your benefits
Sealed manual lathe chuckFor significantly longer maintenance intervals
Patented drive concept
Independent installation of the jaw pairs with subsequent centrically compensating workpiece clamping
Flexible clamping system
For clamping round, cubic or geometrically bulky workpieces
Compensation mechanism
Enables deformation-sensitive clamping even of thin-walled workpieces
High efficiency of the wedge bar system
Process-reliable clamping due to high clamping forces
Lubrication system with grease circulation
Ensures permanent grease supply for constant clamping forces
Visual clamping release
As an indicator for the range in which safe clamping can be ensured
Much lighter design from size Ø 630 mm
For a maximum additional payload of workpiece weight
All functional parts are ground and hardened
Ensures a long life span
Options and special information
Extremely flexible 4-jaw manual lathe chuckWith the new 4-jaw manual lathe chuck ROTA-M flex 2+2, SCHUNK combines the advantages and functions of 2, 3, and 4-jaw chucks on lathes and of vises on mill/turn machines. The pairs of coupled jaws, which are part of a patented drive concept, ensure that the workpieces are centrally clamped, thus avoiding overdetermination.
With the flexible ROTA-M flex 2+2, it is possible to clamp round, cubic and geometrically bulky workpieces. A special seal prevents the ingress of chips and coolant. This protects the internal mechanics so that cast or forged parts can also be machined without hesitation. From size Ø 630 mm and upwards, the chuck has a lighter design, especially for mill/turn centers.
Download PDF Below
Inquiry - ROTA-M flex 2+2